mobile and gis dev notes

% cd /usr/ports/java/jdk16
% make

IMPORTANT: To build the JDK 1.6.0 port, you should have at least
2.5Gb of free disk space in the build area!
 
 
 Due to licensing restrictions, certain files must be fetched manually.
 
 Please download the Update 3 Source from
 http://www.java.net/download/jdk6/6u3/promoted/b05/jdk-6u3-fcs-src-b05-jrl-24_sep_2007.jar
 and the Source Binaries from
 http://www.java.net/download/jdk6/6u3/promoted/b05/jdk-6u3-fcs-bin-b05-jrl-24_sep_2007.jar
 and the Mozilla Headers from
 http://www.java.net/download/jdk6/6u3/promoted/b05/jdk-6u3-fcs-mozilla_headers-b05-unix-24_sep_2007.jar
 .
 
 Please open http://www.oracle.com/technetwork/java/javase/downloads/index.html
 in a web browser and follow the "Download" link for
 "JDK DST Timezone Update Tool - 1_3_45" to obtain the
 time zone update file, tzupdater-1_3_45-2011n.zip.
 
 Please download the patchset, bsd-jdk16-patches-4.tar.bz2, from
 http://www.eyesbeyond.com/freebsddom/java/jdk16.html.
 
 Please place the downloaded file(s) in /usr/ports/distfiles 
 and restart the build.
 
*** Error code 1
 
Stop in /usr/ports/java/jdk16.
*** Error code 1
 
Stop in /usr/ports/java/jdk16.
*** Error code 1

% cd /usr/ports/distfiles
% wget http://www.java.net/download/jdk6/6u3/promoted/b05/jdk-6u3-fcs-src-b05-jrl-24_sep_2007.jar
% wget http://www.java.net/download/jdk6/6u3/promoted/b05/jdk-6u3-fcs-bin-b05-jrl-24_sep_2007.jar
% wget http://www.java.net/download/jdk6/6u3/promoted/b05/jdk-6u3-fcs-mozilla_headers-b05-unix-24_sep_2007.jar
% # download manually tzupdater-1_3_45-2011n.zip from http://www.oracle.com/technetwork/java/javase/downloads/index.html
% # download manually bsd-jdk16-patches-4.tar.bz2 from http://www.eyesbeyond.com/freebsddom/java/jdk16.html

% cd /usr/ports/java/jdk16
% make
% make install

% cd /usr/ports/graphics/geoserver
% make
% make install

% vim /etc/rc.conf
geoserver_enable=YES

% /usr/local/etc/rc.d/geoserver start

% cd /usr/ports/www/apache22
% make config
% make install clean

% vim /etc/rc.conf
apache22_enable=YES

/usr/local/etc/rc.d/apache22 start

% cd /usr/ports/lang/php52
% make config #enable APACHE module
% make
% make install clean
Installing PHP CLI binary:        /usr/local/bin/
Installing PHP CLI man page:      /usr/local/man/man1/
Installing PHP CGI binary: /usr/local/bin/
Installing build environment:     /usr/local/lib/php/build/
Installing header files:          /usr/local/include/php/
Installing helper programs:       /usr/local/bin/
  program: phpize
  program: php-config
....
      This port has installed the following files which may act as network
      servers and may therefore pose a remote security risk to the system.
/usr/local/libexec/apache22/libphp5.so
/usr/local/bin/php
/usr/local/bin/php-cgi
...

% vim /usr/local/etc/apache22/httpd.conf

LoadModule php5_module        libexec/apache22/libphp5.so

<IfModule dir_module>
    DirectoryIndex index.html index.php
</IfModule>

<IfModule mime_module>
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php-source .phps
</IfModule>

% cd /usr/ports/www/apache22
% make config
% make install clean

% vim /etc/rc.conf
apache22_enable=YES

/usr/local/etc/rc.d/apache22 start

Login as root.
%  bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer)
Downloading RVM from wayneeseguin branch stable
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  799k  100  799k    0     0   109k      0  0:00:07  0:00:07 --:--:--  199k
 
Installing RVM to /usr/local/rvm/
    RVM system user group 'rvm' exists, proceeding with installation.
 
# RVM:  Shell scripts enabling management of multiple ruby environments.
# RTFM: https://rvm.beginrescueend.com/
# HELP: http://webchat.freenode.net/?channels=rvm (#rvm on irc.freenode.net)
# Screencast: http://screencasts.org/episodes/how-to-use-rvm
 
# In case of any issues read output of 'rvm requirements' and/or 'rvm notes'
 
Installation of RVM in /usr/local/rvm/ is almost complete:
 
  * First you need add all users that will be using rvm to 'rvm' group,
    anyone using rvm will be operating with `umask g+w`.
 
  * To start using RVM you need to run `source /etc/profile.d/rvm.sh`
    in all your open shell windows, in rare cases you need to reopen all shell windows.
 
  * Optionally you can run `rvm tools rvm-env ruby bash` which will generate 
    shebang wrappers for easier selecting ruby in scripts.
 
# root,
#
#   Thank you for using RVM!
#   I sincerely hope that RVM helps to make your life easier and more enjoyable!!!
#
# ~Wayne

# vim /etc/group
....
rvm:*:1003:root,rupert

#vim /etc/profile
source /etc/profile.d/rvm.sh

% rvm install 1.9.3
Installing Ruby from source to: /usr/local/rvm/rubies/ruby-1.9.3-p0, this may take a while depending on your cpu(s)...
 
ruby-1.9.3-p0 - #fetching 
ruby-1.9.3-p0 - #downloading ruby-1.9.3-p0, this may take a while depending on your connection...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  3 8604k    3  340k    0     0  27173      0  0:05:24  0:00:12  0:05:12 64100

% rvm --default use 1.9.3-p0
% gem install bundler -V

% gem install passenger -V
% cd /usr/local/rvm/gems/ruby-1.9.3-p0/gems/passenger-3.0.11/bin
% ./passenger-install-apache2-module

--------------------------------------------
The Apache 2 module was successfully installed.
 
Please edit your Apache configuration file, and add these lines:
 
   LoadModule passenger_module /usr/local/rvm/gems/ruby-1.9.3-p0/gems/passenger-3.0.11/ext/apache2/mod_passenger.so
   PassengerRoot /usr/local/rvm/gems/ruby-1.9.3-p0/gems/passenger-3.0.11
   PassengerRuby /usr/local/rvm/wrappers/ruby-1.9.3-p0/ruby
 
After you restart Apache, you are ready to deploy any number of Ruby on Rails
applications on Apache, without any further Ruby on Rails-specific
configuration!
 
Press ENTER to continue.
 
 
--------------------------------------------
Deploying a Ruby on Rails application: an example
 
Suppose you have a Rails application in /somewhere. Add a virtual host to your
Apache configuration file and set its DocumentRoot to /somewhere/public:
 
   <VirtualHost *:80>
      ServerName www.yourhost.com
      DocumentRoot /somewhere/public    # <-- be sure to point to 'public'!
      <Directory /somewhere/public>
         AllowOverride all              # <-- relax Apache security settings
         Options -MultiViews            # <-- MultiViews must be turned off
      </Directory>
   </VirtualHost>

LoadModule passenger_module /usr/local/rvm/gems/ruby-1.9.3-p0/gems/passenger-3.0.11/ext/apache2/mod_passenger.so
PassengerRoot /usr/local/rvm/gems/ruby-1.9.3-p0/gems/passenger-3.0.11
PassengerRuby /usr/local/rvm/wrappers/ruby-1.9.3-p0/ruby

<VirtualHost 192.168.69.3:80>
   ServerAdmin rupert@2rmobile.com
   ServerName myserver
   ServerAlias myserver
 
   DocumentRoot "/path/to/myapp/public"
   <Directory "/path/to/myapp/public">
 
   #DocumentRoot "/path/to/myapp/current/public"
   #<Directory "/path/to/myapp/current/public">
      Options Indexes MultiViews
      AllowOverride None 
      Order allow,deny
      Allow from all 
   </Directory>
 
   CustomLog /var/log/apache22/myapp-error.log combinedio
   LogLevel warn 
</VirtualHost>

if ENV['MY_RUBY_HOME'] && ENV['MY_RUBY_HOME'].include?('rvm')
   begin
      rvm_path     = File.dirname(File.dirname(ENV['MY_RUBY_HOME']))
      rvm_lib_path = File.join(rvm_path, 'lib')
      $LOAD_PATH.unshift rvm_lib_path
      require 'rvm'
      RVM.use_from_path! File.dirname(File.dirname(__FILE__))
   rescue LoadError
      # RVM is unavailable at this point.
      raise "RVM ruby lib is currently unavailable."
   end
end
 
# Pick the lines for your version of Bundler
# If you're not using Bundler at all, remove all of them
 
# Require Bundler 1.0 
ENV['BUNDLE_GEMFILE'] = File.expand_path('../Gemfile', File.dirname(__FILE__))
require 'bundler/setup'
 
# Require Bundler 0/9
# if File.exist?(".bundle/environment.rb")
#   require '.bundle/environment'
# else
#   require 'rubygems'
#   require 'bundler'
#   Bundler.setup
# end

% git clone rupert@server:/path/to/your/myapp.git
% cd myapp

% bundle install -V
Fetching source index for http://rubygems.org/
....

% vim /etc/rvmrc
umask g+w
rvm_trust_rvmrcs_flag=1

$ cd /usr/ports/devel/git
$ make install clean

git_daemon_enable="YES"
git_daemon_directory="/var/db/git/repo"
git_daemon_flags="--export-all --syslog --enable=receive-pack --listen=ip_address --verbose"

$ pw user add git
$ passwd git
$ chsh git
Login: git
Password: *******************
Uid [#]: 1002
Gid [# or name]: 1002
Change [month day year]:
Expire [month day year]:
Class:
Home directory: /var/db/git
Shell: /usr/local/bin/git-shell
Full Name: User &
Office Location:
Office Phone:
Home Phone:
Other information:

pw user mod rupert -G git

$ cd /var/db/git/repo
$ sudo mkdir cws-rails.git
$ cd cws-rails.git/
$ sudo git --bare init
Initialized empty Git repository in /var/db/git/repo/cws-rails.git/
$ cd ..
$ ls -l
total 4
drwxr-xr-x  7 root  git  512 Nov 16 12:54 cws-rails.git
drwxrwxr-x  7 git   git  512 Nov 16 11:52 myproject.git
$ sudo chown -Rf git:git cws-rails.git
$ sudo chmod -Rf 775 cws-rails.git

$ git clone rupert@rupert-bsd:/var/db/git/repo/myproject.git
Cloning into myproject...
Password:
remote: Counting objects: 12, done.
remote: Compressing objects: 100% (9/9), done.
remote: Total 12 (delta 0), reused 0 (delta 0)
Receiving objects: 100% (12/12), done.

~/Desktop/myproject[master]% gc -m "Updated CHANGELOG" CHANGELOG 
[master d9fd0f7] Updated CHANGELOG
 1 files changed, 1 insertions(+), 0 deletions(-)
~/Desktop/myproject[master]% git push
Password:
Counting objects: 5, done.
Delta compression using up to 2 threads.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 332 bytes, done.
Total 3 (delta 1), reused 0 (delta 0)
To rupert@rupert-bsd:/var/db/git/repo/myproject.git
   5d16498..d9fd0f7  master -> master

# Copy the gitweb directory to your apache22 directory
$ sudo cp -Rf /usr/local/share/examples/git/gitweb /usr/local/www/apache22/data/
 
# Edit gitweb.cgi to point to your repo
$ vim /usr/local/www/apache22/data/gitweb/gitweb.cgi
our $projectroot = "/var/db/git/repo";

# Allow apache to execute gitweb.cgi
Alias /gitweb /usr/local/www/apache22/data/gitweb
 
<Directory /usr/local/www/apache22/data/gitweb>
  Options FollowSymLinks +ExecCGI
  AddHandler cgi-script .cgi
</Directory>