You would find all the installers here:
http://192.168.1.10/installers/
1. Edit hosts file as follows:
[root@appserver php]# more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.1.10 appserver
2. Edit your host as follows:
[root@appserver php]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=appserver
GATEWAY=192.168.1.1
3. Apache:
http://192.168.1.10/installers/httpd-2.0.58.tar.gz
# tar -zxvf httpd-2.0.58.tar.gz
# cd httpd-2.0.58
# ./configure --help
# ./configure --prefix=/usr/local/apache2 --enable-so --with-mpm=prefork --enable-rewrite
# make
# make install
3.1 Starting apache2 on boot
#cd /usr/local/apache2/bin
#cp -Rf apachectl /etc/init.d/httpd
3.2 Edit httpd as follows
#cd /etc/init.d
#vi httpd
#!/bin/sh
# chkconfig: 35 80 15
# processname: httpd
# description: httpd
# Copyright 2000-2005 The Apache Software Foundation or its licensors, as
# applicable.
3.3 create runlevels for httpd
#/sbin/chkconfig --add httpd
#/sbin/chkconfig --level 345 httpd on
#/etc/init.d/httpd start
4. ColdFusion
4.1 Download http://192.168.1.10/installers/coldfusion-61-lin.bin
# chmod +x coldfusion-61-lin.bin
4.2 Run installer
# ./coldfusion-61-lin.bin
4.3 ColdFusion install:
Launching installer...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
----------------
->1- English
CHOOSE LOCALE BY NUMBER: 1
DO YOU ACCEPT THE TERMS OF THIS LICENSE AGREEMENT?
(Y/N) : Y
The installer has found the following errors/warnings:
Warning: C++ compatibility pack
The installer was unable to determine if the C++ compatibility pack is
installed by running the following command: rpm --query compat-libstdc++
If this machine uses a version of glibc that is 2.2.5.x or higher the
compatibility pack is necessary for C++ custom tags, Verity, and web server
connectors to work properly.
For more information see the installation manual at
http://www.macromedia.com/go/livedocs_cfmx61docs
PRESS TO CONTINUE WITH THE INSTALLER:
===============================================================================
Existing Macromedia ColdFusion MX Installation?
-----------------------------------------------
You cannot install a new installation of Macromedia ColdFusion MX 6.1 if you
have an existing version of Macromedia ColdFusion MX installed on this
computer.
If you do have a previous version installed, the installer can update your
current current installation to Macromedia ColdFusion MX 6.1.
Is there already a version of Macromedia ColdFusion MX installed on this
computer? (Y/N): N
===============================================================================
Install Type
------------
Choose the type of Macromedia ColdFusion MX installation you want to perform:
->1- Install new version of ColdFusion MX
2- 30-day trial (Enterprise Edition)
3- Developer Edition (Single-IP Only)
Installation Choice: 1
Serial Number: CED600-18040-87264-92597
===============================================================================
Install Configuration
---------------------
What kind of installation do you want?
->1- Server configuration
2- J2EE configuration (ColdFusion MX with JRun 4)
3- J2EE configuration (EAR file)
4- J2EE configuration (WAR file)
Please choose one of the following options: 1
===============================================================================
Choose Install Folder
---------------------
Select the directory in which to install Macromedia ColdFusion MX.
Directory:
Default Install Folder: /opt/coldfusionmx
ENTER AN ABSOLUTE PATH, OR PRESS TO ACCEPT THE DEFAULT
: [just press enter]
===============================================================================
Existing ColdFusion 4.5 or 5 Installation?
------------------------------------------
The installer can migrate your settings from ColdFusion 4.5 or 5 if you have
an
installation on this computer.
Is there a version of ColdFusion 4.5 or 5 installed on this computer? (Y/N) N
===============================================================================
Configure Web Servers
---------------------
Please configure your webserver(s). If you do not configure a webserver the
built-in webserver will be used on port 8500.
1- Add Web Server Configuration
->2- Continue with installation
Choice: 2
===============================================================================
Runtime User
------------
Enter the name of the runtime user. This user must exist already on the
system.
User Name: (DEFAULT: nobody): [enter]
===============================================================================
Init System
-----------
Would you like ColdFusion MX to start at System Boot? Please note, this is
only supported on Solaris and Red Hat Linux. If you answer no to this, you can add
ColdFusion MX to system boot post install by running
/opt/coldfusionmx/bin/cfmx-init.sh
Answer (Y/N): Y
===============================================================================
Administrator Password
----------------------
Enter the password you will use to control access to the ColdFusion MX
Administrator.
This field is required.
Password:
Confirm Password:
===============================================================================
Installation Confirmation
-------------------------
Installation Type:
Server configuration
Licensing:
Fully Licensed Edition
Serial Number: CED600-18040-87264-92597
Install Directories:
Product: /opt/coldfusionmx
Web root: /opt/coldfusionmx/wwwroot
Server Information:
Web Server: Built-in Web Server
Port: 8500
Disk Space Information (for Installation Target):
Required: 433,293,879 bytes
Available: 25,831,923,712 bytes
PRESS TO CONTINUE:
[enter]
PRESS TO CONTINUE:
===============================================================================
Installing...
-------------
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Installation Complete
---------------------
You have successfully completed the first step in installing Macromedia
ColdFusion MX.
To continue with your installation, go to /opt/coldfusionmx/bin and type
"./coldfusion start" to start your server.
Once the server is started log in to the Configuration Wizard at
http://[machinename]:8500/CFIDE/administrator/index.cfm
PRESS TO EXIT THE INSTALLER:5. Start coldfusion
# /etc/init.d/coldfusionmx start
Starting ColdFusion MX…
There may be a few moments before you can access the ColdFusion MX administrator. This is normal.
======================================================================
ColdFusion MX has been started.
ColdFusion MX will write logs to /opt/coldfusionmx/logs/cfserver.log
======================================================================
6. Bind ColdFusion with Apache.
$JAVA_EXECUTABLE -jar $CF_DIR/runtime/lib/wsconfig.jar \
-ws apache \
-dir /usr/local/apache2/conf \
-bin /usr/local/apache2/bin/httpd \
-script /usr/local/apache2/bin/apachectl \
-coldfusion -v
[root@appserver /]# cd /opt/coldfusionmx/bin/connectors/
[root@appserver connectors]# ls
apache_connector.sh connectorslist.sh iplanet_connector.sh remove_all_connectors.sh upgrade_all_connectors.sh
[root@appserver connectors]# sh -v apache_connector.sh
You can check if your binding is successfull if you see the ff
messages:
Found JRun server default at 127.0.0.1:2901
CentOS release 4.4 (Final)
Detected Red Hat Linux release 7 or lower
Using Apache binary /usr/local/apache2/bin/httpd
Server version: Apache/2.0.58
Apache 2.0.58 is supported
Using Apache control script /usr/local/apache2/bin/apachectl
Parsing Apache configuration file /usr/local/apache2/conf/httpd.conf
Exec'ing chmod 777 /opt/coldfusionmx/runtime/lib/wsconfig/1
Set permission to 777 on /opt/coldfusionmx/runtime/lib/wsconfig/1
Exec'ing chmod +x /opt/coldfusionmx/runtime/lib/wsconfig/1/mod_jrun20.so
Set permission to execute on /opt/coldfusionmx/runtime/lib/wsconfig/1/mod_jrun20.so
Created file /opt/coldfusionmx/runtime/lib/wsconfig/1/mod_jrun20.so
Wrote file /usr/local/apache2/conf/httpd.conf
Added JRun configuration to Apache configuration file /usr/local/apache2/conf/httpd.conf
Created file /opt/coldfusionmx/runtime/lib/wsconfig/1/README.txt
Wrote file /opt/coldfusionmx/runtime/lib/wsconfig/wsconfig.properties
Exec'ing /usr/local/apache2/bin/apachectl restart
httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
Restarted Apache server
The Apache connector was installed to /usr/local/apache2/conf
7. Your httpd.conf file should contain the ff:
------------------------httpd.conf------------------------------
# NOTE: DO NOT ATTEMPT TO PUT THIS IN YOUR HTTPD.CONF MANUALLY.
LoadModule jrun_module /opt/coldfusionmx/runtime/lib/wsconfig/1/mod_jrun20.so
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ssl false
JRunConfig Ignoresuffixmap false
JRunConfig Serverstore /opt/coldfusionmx/runtime/lib/wsconfig/1/jrunserver.store
JRunConfig Bootstrap 127.0.0.1:51010
#JRunConfig Errorurl
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc8. Copy ColdFusion Administrator to your webroot
# cd /usr/local/apache2/htdocs
# rm -Rf *
# cp -Rf /opt/coldfusionmx/wwwroot/CFIDE .
# ln -s CFIDE cfide
Open your browse and point to: http://192.168.1.15/cfide/administrator/
9. CFADMIN settings:
- Check Disable RDS Services. Press Next
- Install Documents: Yes. Press Next
- OK
10. Copy cfdocs to webroot:
# cp -Rf /opt/coldfusionmx/wwwroot/cfdocs /usr/local/apache2/htdocs/